PDA

View Full Version : Need a few Part Numbers (Dipstick, Plastics)



Christian_K
06-30-2011, 07:20 PM
Hi i need a few Part Numbers i will add here in the comming weeks/months.

1. Thing my MB Dealer could not find via the EPC is a part-nr for the engine oil dipstick. In the EPC when you click on the Dipstick it says "only true for armored cars", for normal ones, no Part-Nr available...

2. Thing is the two-part plastic near the Modules Box, where all the Cables of the upper and lower wiring harnesses, as well as the ETAs cable and the only cooling-hose to the heat-exchanger is going/coming from, passing through.

gsxr
06-30-2011, 11:19 PM
1. It looks like the note in the EPC only applies to 'model 980', so the listed p/n of 102-010-02-72 should be fine. Order one up and compare the length to a friend's M119.97x dipstick. FWIW, the USA version EPC shows the same part number, with no note about safety/armored vehicles.

2. Probably easiest to read the part number off the plastic piece on someone else's car... I've seen this in the EPC but can't locate it at the moment...

:detective:

Juho
07-02-2011, 01:02 PM
2. Thing is the two-part plastic near the Modules Box, where all the Cables of the upper and lower wiring harnesses, as well as the ETAs cable and the only cooling-hose to the heat-exchanger is going/coming from, passing through.



This one?

http://www.mbstore.jp/mobile/product/42 ... s5vaud07k1 (http://www.mbstore.jp/mobile/product/420?PHPSESSID=abts045rbss9989ps5vaud07k1)

Christian_K
07-02-2011, 05:33 PM
This one?

http://www.mbstore.jp/mobile/product/42 ... s5vaud07k1 (http://www.mbstore.jp/mobile/product/420?PHPSESSID=abts045rbss9989ps5vaud07k1)

Yes! Merci...

For all others: Part-Number is "124 546 0680"