Last edited by 036; 08-12-2011 at 10:39 AM.
The ultimate car to go shopping in
I'm sure -arnt- will have something to say on this topic .....
Perfect! any performance figures and weight values?
Breaks from stock SL600 with Mercedes permition =)
Was able to make "just" this pic.
PS Günter Artz built this Tee ´cause he wishes to take his big dog in a 500. It´s not a joke.
Last edited by 036; 08-14-2011 at 06:10 AM.
Second car was built on request for a friend. "Got lost" in Holland 2002.
Pictured exemplar- one of the best and very clean swaps i´ve ever saw. Just beautiful. And general condition of the car says it´s in a veeeery good hands.
PS Believe me, chaps, it was not easy to find and catch this car.
That attachment says they needed 318 hours at 78DM, so that's about 30€/hour, not bad. How they managed to spray paint it for 900€ is beyond me, and why 2 doors, one trunk lid, a "dustcatcher"?? and tank only cost ~800€ is unbelievable for me... Or did I just translate that wrong?
And what about being lost in Holland? Any more details?
Teillackierung- part painting- i guess "just" new bottom and fitted into original paint.
78 DM = 39 Euro.
Neuwertiger Ersatzteile- means like new. So could be used parts too.
You also read- "Original Mercedes Esratzteile- 15,167,14 DM"
About second car- i have no more infomation, but i know who has.
Is this an original 500E with the wagon roof grafted into the sedan?
Last edited by 036; 08-14-2011 at 05:27 AM.
I've had one of the two 500TEs we have here in Norway, that was in fact my very first 124036 (Oct.2006-May2007). That car was actually a regular stationwagon converted with ’92 500E parts. So I doubt it had the additional reinforcement on the underbody chassis - such as tighter spot welding and reinforced members in the rear frame. On this car they replaced the entire cardan column and panels in the engine bay to make room for the driveline and cats. I revealed a horrible rust attack in the floor panels around the cardan column, so I gave up the repair and sold it when I came over the Limited. It is now repaired and road going again. It’s in 744 silver (pics enclosed).
The other 500TE in Norway is an E500 converted to stationwagon. They took the rear compartment from a stationwagon (cut under the rear seats), along with the roof as one part - and laid it over the E500 main body - more like a "visor cap". So this car has more of a 124036 in it, but still not the reinforced members in the rear frame. One reason for doing it this way was to avoid the high tax on big engine cars here in Norway. This was in fact a repair of a condemned regular stationwagon by replacing the front section, and at the same time upgrading to a bigger engine. Simple thinking because upgrades on 10 years old cars don't require additional tax in Norway! This car is fully equipped with el.st.column, memory seats etc.. and is very good looking in a dark color.
As for 500E/E500 stationwagon body upgrades. The wider rear fenders on a 124036 compared to a regular W124 starts just at the rear corner from the tail lights. If you look closely you'll seldom see the rear fenders fully replaced on stationwagon upgrades, only the wider wheel arches. Replacing the entire rear fender is a much more comprehensive job, simply because it won't fit with the other stationwagon panels. Another detail is the rear bumper. To make a proper look it has to be a combo, where the upper part of the center section from the stationwagon bumper is inserted into a 500 bumper. This is a tricky job, so very often is a regular TE bumper used with stretched corners to mate the wheel arches, probably with the 500 chrome lists. I’ve seen one 220TE here in Norway where all that mods are done, and it gives a significant better look.
This 500TE from Artz looks to be a real rebuilt 500E, where only the necessary chassis panels are replaced to make it as a stationwagon, thats nice. Over the years I've seen a couple of 500TEs for sale in Germany, and at least one of them was rebuilt this way. The 500 rear seat are normally left out to maintain the rear seat folding application. Without being 100% sure, I think the back rest on the 500 rear seats are a bit different, so they don’t fit properly inside a stationwagon body (?). On the silver 500TE they were moved about 10-12 mm forward. They've also solved the rear bumper case by using an AMG stationwagon bumper, a smart solution IMO.
A 500TE is a very good looking stationwagon, believe me!
Last edited by 500AMM; 08-23-2011 at 07:45 AM. Reason: additional text
'92 500E, 6.0AMG, König SC, Black on Black --- '94 E500 Limited, Sapphire black --- '05 E220 T Cdi Avantgarde, Cubanit silver --- '85 Kawasaki Z1300 DFI, Black
-- The best thing with telling the truth, is that you don't need to keep in mind what you said --
Its the car that should have existed from factory. I think the W124T is the best looking station wagon ever. I remember the first one I was in. 1993 E320T Impala Brown/Leather beige, it was 4 years old and just imported to Q8...So cool at the time.
I agree with you, 195910. This puts all other wagons to shame.
Arnt. Very interesting insight into these conversions. Much more work than one would think at first sight. I would REALLY like to own one.
Thanks to all for posting.
92 500e 56,000 miles
93 500e 179,000 miles sold
92 500e 110,000 miles sold
I got a letter from a gentleman who took a 400E and "visor capped" spliced a wagon. Attached are scans of the pictures he sent.
Unfortunately, I lost his contact info during a move.