Parting out a 1993 500E

[portiadog1]

Jeff, I tried to reply to your message but you have hit your quota. It says you need to make some space.

[captruff]

I made room just now

Jeff

[mercepor]

Could you please check the part num of the brake booster?
Do you ship to Europe?
Thx

[captruff]

Could you please check the part num of the brake booster?
Do you ship to Europe?
Thx

Part number on brake booster...Lucas 003 4308730


I can ship to Europe for these smaller pieces, but I will not under declare value.

Jeff

[Cab500]

Thanks Jeff. Would you know of anyone else that may have them? Cheers
Art

[captruff]

Thanks Jeff. Would you know of anyone else that may have them? Cheers
Art

Art:

Chances are good I will part out a few W124 E420 cars next year, so I might have the opportunity to secure them next year.

These pieces you want will require considerable effort to cut out and the shipping to Australia will not be cheap.

Jeff

[gsxr]

Could you please check the part num of the brake booster?

FYI... the brake booster & master cylinder are completely different on late Euro-spec cars. The booster vacuum port is in a different location, and the MC is the switching type with a solenoid attached. Make sure to compare part numbers and photos! The change was somewhere around 3/1993 production, I think. Early Euro cars use the same setup as all USA models.

[Klink]

Exactly correct. The production break point was sometime in 3/1993. I am going to be unavailable for a period of time, and I am not currently in the position to give the exact Euro car VIN break point, but it is in the EPC.

[captruff]

Center console wood available:

$120.00 delivered to the lower 48


Jeff

[Cab500]

Excellent. I am in the middle of transplanting a 119 into a right hand drive E220 cab. Would you be looking at parting them out early in the year or later, cheers.

[steve h]

I have a brake booster taken from a low mileage wrecked car. What number are you looking for?
I have checked the part number : Lucas 003 4308730
I'll ship anywhere.
Rgds Steve

[atg]

I will take that differential, and the axles (if I need them) to put into a 1994 e420, if still available. Thanks, Karl in LA

Sent from my SAMSUNG-SM-G935A using Tapatalk

[atg]

Art:

Chances are good I will part out a few W124 E420 cars next year, so I might have the opportunity to secure them next year.

These pieces you want will require considerable effort to cut out and the shipping to Australia will not be cheap.

Jeff

I need that little velour piece of trim above the steering column if you have one.

Sent from my SAMSUNG-SM-G935A using Tapatalk

[David Da Silva]

Hello can you sell me the heat shields from underneath of the car? Thank you!

Enviado desde mi BLU STUDIO C 5+5 LTE mediante Tapatalk

[merclover]

How much for the oiler tubes? Are they plastic or metal? Thanks

[gerryvz]

Track Rat(TM) ?!?

[gsxr]

Track Rat(TM) ?!?

Nope - see post 58. Cut up and hauled away for scrap metal:

Unfortunately the shell of the car was picked up already...

Jeff

[gerryvz]

Shell hauled up to Boise ?!?

[gsxr]

Shell hauled up to Boise ?!?

Naw, I don't need any more of those! Besides, I'm pretty sure Jeff chopped off the rear fenders in addition to lopping off the front clip - so it only would have been half a shell.

Attachment 56270

[superstar]

Hello,
I am looking for :
Fuel cooler
AC Suction Line Hose
Rear brake calipers

[captruff]

Hello,
I am looking for :
Fuel cooler
AC Suction Line Hose
Rear brake calipers

I can help you with rear brake calipers and the main AC line

Jeff

[superstar]

PM sent!

[ngenius1]

Hi.
Do you still have the passenger door mirror ?

[captruff]

Hi.
Do you still have the passenger door mirror ?

Yes I have the mirrors

Jeff

[ngenius1]

How much posted to London UK ?
For both mirrors complete.

[Benz]

any of the seats, door panels, available and what shape are they in

thank you.

[captruff]

any of the seats, door panels, available and what shape are they in

thank you.

Rear seats and door panels are available, see pictures here

https://www.500eboard.com/forums/showthread.php?t=10578

Jeff

[124421]

Rear seats and door panels are available, see pictures here

https://www.500eboard.com/forums/showthread.php?t=10578

Jeff

Sorry if I missed, but front or rear sway bars?

[M104-AMG]

Is the 3rd brake light assembly, rear door window lifts, and spare wheel well sheet metal (rust free) available ?

Thanks,
neil

[captruff]

Is the 3rd brake light assembly, rear door window lifts, and spare wheel well sheet metal (rust free) available ?

Thanks,
neil

Neil

Third brake light was already broken as well as the current E420 parts car. Spare wheel sheet metal was too rusted to slvage.

I do have working rear window regulators available.

Jeff

[M104-AMG]

Neil

Third brake light was already broken as well as the current E420 parts car. Spare wheel sheet metal was too rusted to slvage.

I do have working rear window regulators available.

Jeff

Great. Let me know total with shipping and payment info.

Thanks,
neil

[BahnStorm]

Are the 8-hole wheels available?

If so, what shape are they in?

[w201-16]

Do you have tandem servopump??

Sent fra min D5803 via Tapatalk

[captruff]

Do you have tandem servopump??

Sent fra min D5803 via Tapatalk

The tandem pump is being sold with the engine itself.

Jeff

[captruff]

Engine and transmission working when car was parted.

Local pick up in socal $600.00 obo

Jeff

[David Da Silva]

Engine and transmission working when car was parted.

Local pick up in socal $600.00 obo

Jeff

Hello do you have the aluminum heat Shields from underneath? The ones who reduces the heat of the exhaust, transmission and driveshaft I need all of them excepting the muffler one I got that one

Enviado desde mi SM-A310F mediante Tapatalk

[captruff]

Hello do you have the aluminum heat Shields from underneath? The ones who reduces the heat of the exhaust, transmission and driveshaft I need all of them excepting the muffler one I got that one

Enviado desde mi SM-A310F mediante Tapatalk

I should have the mid section shield for the driveshaft.

Jeff

[David Da Silva]

I should have the mid section shield for the driveshaft.

Jeff

Im interested how we can do to make business?

Enviado desde mi SM-A310F mediante Tapatalk

[JwashE]

Jeff, do you have an interior rearview mirror?

[captruff]

Jeff, do you have an interior rearview mirror?

No, that part was already sold.

Jeff

[mercedesbenz911]

Do you happen to still have the rear diff (or another.036 diff)? I saw a few inquiries above but no indication of a definite sale.

Thanks.

[captruff]

Do you happen to still have the rear diff (or another.036 diff)? I saw a few inquiries above but no indication of a definite sale.

Thanks.

Yes, I do have the rear differential and axels.

Text or call me 949-37o nine five hundred

Jeff

[abad190]

do you still have the fuel tank?

[ricsim]

Hi Jeff.
I looking for a right steering knuckle. (part 5)

Have you got it please?

[mercepor]

Hi,
Afaik this part is common with the 300/320TE w124. So, if you are lucky you can find it in a junkyard or at sbody who is parting out a break w124....
To be checked.

[ricsim]

OK. Thank you for this information.

[gsxr]

Afaik this part is common with the 300/320TE w124. So, if you are lucky you can find it in a junkyard or at sbody who is parting out a break w124....
To be checked.

The part #'s are A1293300220 (left/driver) and A1293300320 (right/passenger). They are used on the V8 models, cabrios, and LWB. In USA that means 400E420, E500E, cabriolet, and all R129. But, they are not the same as most 4/5/6-cyl 124 chassis.

Still should be easy to obtain from a 124.034 or R129.

[ricsim]

OK. I will search my part with theses informations.
The right one is A1293300220.
Thank for your answers and your help !

[captruff]

do you still have the fuel tank?

Sorry for the late reply. Yes, I have the fuel tank.

Jeff

[dbenz]

Hi,
Would you be interested in shipping engine and transmission to KS? Not sure if it would even be cost effective, just figure I would ask.
Thanks --

[captruff]

Hi,
Would you be interested in shipping engine and transmission to KS? Not sure if it would even be cost effective, just figure I would ask.
Thanks --

I do have both the engine and transmission. I can prepare them on a wood pallet for shipment by common carrier. I have access to a forklift to get them loaded as well but I do not have any contracts with common carriers. You would need to arrange the shipping from your side. Location in CA, 92610-2503


Thanks

Jeff

[e500.org]

Hi, do you still have the interior? Thanks

[dbenz]

Hi Jeff,
Thanks for the response, but after looking into shipping I need to find something local or at least closer. Best of luck!