PDA

View Full Version : Wheel fitment help!



Johnnybenz500e
07-28-2014, 04:10 PM
Looking to purchase Lorinser rs90 rims that are 17x8 et33 5x112!

is this offset going to fit plus will my stock lugs switch over?

gsxr
07-28-2014, 04:12 PM
Those should be ok, but it's almost a stock fitment... won't be aggressive on a 500E (i.e., won't fill out the fenders any more than the stock wheels).

:)

Johnnybenz500e
07-28-2014, 04:36 PM
Thanks! Just looking for a minor upgrade, rare wheel rare car sounds cool to me .. Can't go to crazy with wheels in NYC flats are to easy

Hi-Power
07-28-2014, 06:15 PM
Thanks! Just looking for a minor upgrade, rare wheel rare car sounds cool to me .. Can't go to crazy with wheels in NYC flats are to easy

The RS90 from Lorinser is a nice design period correct for your 500E. I hope your set still has the original machined finish on the faces and lips. As a suggestion, you can install 10mm to 15 mm spacers all around if you want to fill the fenders for a more sporty look. Good luck!

Johnnybenz500e
07-28-2014, 06:56 PM
The RS90 from Lorinser is a nice design period correct for your 500E. I hope your set still has the original machined finish on the faces and lips. As a suggestion, you can install 10mm to 15 mm spacers all around if you want to fill the fenders for a more sporty look. Good luck!


Yes es polished finish but they need tlc, but my question is would my 16" stock lugs fit in these wheels

Hi-Power
07-28-2014, 10:34 PM
Yes es polished finish but they need tlc, but my question is would my 16" stock lugs fit in these wheels

You might be able to find if your 16" stock lugs by following the instructions on this video:

https://m.youtube.com/watch?v=wC7bc8KzmUE