Page 2 of 2 FirstFirst 12
Results 61 to 76 of 76

Thread: W124 500TE Project - Lets do this!

  1. #61
    Senior Member jaymanek's Avatar
    Join Date
    Aug 2011
    Location
    Midlands, UK
    Posts
    169

    Re: W124 500TE Project - Lets do this!

    Hi All,

    I dont think this engine wants to go back in the car. I have another slight set back.

    I installed the new chain, guides etc. Turned the engine by hand a few times and everything spot on. My 6mm "factory tools" nicely drop into place when crank is at 45 before.

    Then tonight I installed the timing case cover with new O rings and using the usual Mercedes sealant that I keep. This is the stuff recommended for timing covers, its sticky, tacky and never really goes hard.

    Then I installed the oil pump, upper pan and lower pan. I have a question about sealant so will start a thread on that.

    All good.

    I rotate the engine back around on the stand to its normal position and start packing tools away for the night.

    I notice a rubber O ring perched on the camshaft pulley.

    Took me a moment but I realised what happened.... I may have cursed a couple of times.

    So now I need to undo all that work. This is not the problem. The problem is I have to wait for new sump gaskets from Mercedes which im sure will be a 2-3 day order.

    GRRRRR.

    Yes, yes, im glad I noticed it now rather than once installed, but I think this engine is really trying to get me back for messing with it.

  2. The Following 4 Users Say Thank You to jaymanek For This Useful Post:

    a777fan (4 Days Ago), gsxr (4 Days Ago), Hakie (3 Days Ago), sheward (3 Days Ago)

  3. #62
    Senior Member jaymanek's Avatar
    Join Date
    Aug 2011
    Location
    Midlands, UK
    Posts
    169

    Re: W124 500TE Project - Lets do this!

    Spot the difference:

    Just gotta laugh.
    Attached Images Attached Images

  4. The Following 2 Users Say Thank You to jaymanek For This Useful Post:

    gsxr (3 Days Ago), TerryA (3 Days Ago)

  5. #63
    .036 Hoonigan™
    E500E Boffin
    gsxr's Avatar
    Join Date
    Dec 2008
    Location
    Boise, ID, USA
    Posts
    18,993

    Re: W124 500TE Project - Lets do this!

    Oooo! I found it! I found it!

    Attached Images Attached Images

  6. The Following 2 Users Say Thank You to gsxr For This Useful Post:

    JC220 (3 Days Ago), TerryA (3 Days Ago)

  7. #64
    Senior Member jaymanek's Avatar
    Join Date
    Aug 2011
    Location
    Midlands, UK
    Posts
    169

    Re: W124 500TE Project - Lets do this!

    there are more... ill give you a clue. i only noticed when trying to bolt in the timing case cover.

  8. The Following 2 Users Say Thank You to jaymanek For This Useful Post:

    gsxr (3 Days Ago), TerryA (3 Days Ago)

  9. #65
    E500E Guru JC220's Avatar
    Join Date
    Feb 2016
    Location
    Ireland
    Posts
    1,199

    Re: W124 500TE Project - Lets do this!

    Quote Originally Posted by jaymanek View Post
    there are more... ill give you a clue. i only noticed when trying to bolt in the timing case cover.
    Yes that's a biggie! The bolt holes don't match up. Are there different gasket PN's available? Could it be you have one from a earlier or later m119? Gen-U-Whine gaskets yes?
    1987 w124 200 E36 AMG Project car - ongoing 1990 w124 300E-24 Fully Restored
    1992 w124 500E Rolling Restoration - ongoing 1994 C124 E320 - Recently acquired resto project
    2007 w211 E220CDI Avantgarde Daily Driver
    Parted out myself- 95 C36 AMG / 95 E250D / 98 w124 India E220

  10. The Following User Says Thank You to JC220 For This Useful Post:

    TerryA (3 Days Ago)

  11. #66
    Senior Member jaymanek's Avatar
    Join Date
    Aug 2011
    Location
    Midlands, UK
    Posts
    169

    Re: W124 500TE Project - Lets do this!

    Its my fault.

    There are two gasket versions for the left. Early or Late.

    I ordered early gaskets for both sides as everything for this car is the early version.

    On the right head gasket there are three choices and I didnt notice that mine is the "middle" version.

    5 day order from Germany.

  12. The Following 2 Users Say Thank You to jaymanek For This Useful Post:

    gsxr (3 Days Ago), TerryA (3 Days Ago)

  13. #67
    E500E Guru JC220's Avatar
    Join Date
    Feb 2016
    Location
    Ireland
    Posts
    1,199

    Re: W124 500TE Project - Lets do this!

    Yes I see that - yours should be 1190161820 for the left & 1190161920 for the right by my reckoning
    1987 w124 200 E36 AMG Project car - ongoing 1990 w124 300E-24 Fully Restored
    1992 w124 500E Rolling Restoration - ongoing 1994 C124 E320 - Recently acquired resto project
    2007 w211 E220CDI Avantgarde Daily Driver
    Parted out myself- 95 C36 AMG / 95 E250D / 98 w124 India E220

  14. The Following User Says Thank You to JC220 For This Useful Post:

    TerryA (3 Days Ago)

  15. #68
    Senior Member jaymanek's Avatar
    Join Date
    Aug 2011
    Location
    Midlands, UK
    Posts
    169

    Re: W124 500TE Project - Lets do this!

    I know.. Had these gaskets here for months now too.

  16. The Following User Says Thank You to jaymanek For This Useful Post:

    gsxr (3 Days Ago)

  17. #69
    E500E Guru JC220's Avatar
    Join Date
    Feb 2016
    Location
    Ireland
    Posts
    1,199

    Re: W124 500TE Project - Lets do this!

    Quote Originally Posted by jaymanek View Post
    I know.. Had these gaskets here for months now too.
    It happens to the best of us! I have shelves filled with parts that didn’t fit and too late to return.... The engine cylinders look great now BTW – it’s coming together nicely! Great work. Do you intend to fully respray the car? Or blend the paint if the rest of it is still decent?
    1987 w124 200 E36 AMG Project car - ongoing 1990 w124 300E-24 Fully Restored
    1992 w124 500E Rolling Restoration - ongoing 1994 C124 E320 - Recently acquired resto project
    2007 w211 E220CDI Avantgarde Daily Driver
    Parted out myself- 95 C36 AMG / 95 E250D / 98 w124 India E220

  18. #70
    Senior Member jaymanek's Avatar
    Join Date
    Aug 2011
    Location
    Midlands, UK
    Posts
    169

    Re: W124 500TE Project - Lets do this!

    The whole car is being painted including the door shuts.

    The loose plan was to get the engine in and running in the next week or two.

    The bodyshop say they can work on the paint over the Christmas period which is normally quiet for them.

    However it seems like I am having to do everything twice at the moment so we will see how that plan goes!

    I certainly do not want to paint the car until the engine is in and running.

  19. The Following User Says Thank You to jaymanek For This Useful Post:

    JC220 (3 Days Ago)

  20. #71
    .036 Hoonigan™
    E500E Boffin
    gsxr's Avatar
    Join Date
    Dec 2008
    Location
    Boise, ID, USA
    Posts
    18,993

    Re: W124 500TE Project - Lets do this!

    I completely missed the timing cover bolt pattern.

    This also solves the mystery as to why the right cylinder head, gasket, AND timing cover are all different for .974 engines up to #1893.

    Affected engines would have been very early builds, 1990-1991 and very, very early 1992 USA model year. The change would have been approximately in September 1991.


  21. #72
    Senior Member jaymanek's Avatar
    Join Date
    Aug 2011
    Location
    Midlands, UK
    Posts
    169

    Re: W124 500TE Project - Lets do this!

    Mine is engine no 5037.

  22. #73
    .036 Hoonigan™
    E500E Boffin
    gsxr's Avatar
    Join Date
    Dec 2008
    Location
    Boise, ID, USA
    Posts
    18,993

    Re: W124 500TE Project - Lets do this!

    Quote Originally Posted by jaymanek View Post
    Mine is engine no 5037.
    Small world. One of my engines is 5031, only six away from yours! And yep, it's the "middle" range.

    The late gaskets were for the switch to open-deck blocks (early/mid 1994 production dates).


  23. The Following User Says Thank You to gsxr For This Useful Post:

    jaymanek (3 Days Ago)

  24. #74
    Senior Member jaymanek's Avatar
    Join Date
    Aug 2011
    Location
    Midlands, UK
    Posts
    169

    Re: W124 500TE Project - Lets do this!

    Well we live and learn... This is my first M119 full rebuild and it is turning out to be an education.

    Done a few M117's and lots of smaller MB engines before...

  25. The Following 2 Users Say Thank You to jaymanek For This Useful Post:

    gsxr (3 Days Ago), Hakie (3 Days Ago)

  26. #75
    Senior Member jaymanek's Avatar
    Join Date
    Aug 2011
    Location
    Midlands, UK
    Posts
    169

    Re: W124 500TE Project - Lets do this!

    This was the engine when I was timing it up. I then had to pull the right head gasket back off so now its all off again.

    Question:

    The freewheel pulley that wedges between the timing cover and block. Any special grease recommended here? I find it odd that there is no special surface here for the pulley to spin on.
    Attached Images Attached Images

  27. The Following User Says Thank You to jaymanek For This Useful Post:

    gsxr (21 Hours Ago)

  28. #76
    E500E Guru Rouven036's Avatar
    Join Date
    Oct 2009
    Location
    Middle East / Germany
    Posts
    508

    Re: W124 500TE Project - Lets do this!

    You mean the center chain drive sprocket? It is lubricated by oil pressure, supplied by a bore in the block directly to the main oil galley (direct below the sprocket in your photo) flowing through the hollow shaft and then reaching the outer flange to lubricate.
    Last edited by Rouven036; 16 Hours Ago at 02:39 PM.
    W123, W124, R129, W163, W201, R230

  29. The Following User Says Thank You to Rouven036 For This Useful Post:

    jaymanek (2 Hours Ago)

Similar Threads

  1. FS: 500TE limited and E60 AMG
    By mercepor in forum Cars for Sale - 500E / E500 ONLY
    Replies: 3
    Last Post: 03-03-2017, 10:23 AM
  2. 500TE Artz
    By 036 in forum AMG & Tuner Cars
    Replies: 17
    Last Post: 05-05-2014, 10:44 PM
  3. Lets go nuts
    By Taxi Driver in forum M119 Engine
    Replies: 2
    Last Post: 07-13-2012, 11:16 PM
  4. 500TE for sale in Germany
    By 036 in forum AMG & Tuner Cars
    Replies: 3
    Last Post: 03-27-2012, 04:57 AM
  5. 500TE
    By 500ESpain in forum Cars for Sale - 500E / E500 ONLY
    Replies: 5
    Last Post: 04-26-2010, 03:06 AM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •