I'm seeing $600, not $1k? If it's a true bolt-on, that's not unreasonable. Not real impressed with the weld spatter on the tips, but as long as you can't see it when installed. Wait, I see in the text he wants a bunch more $$ for the 500E/R129 bolt-on. WOW, talk about a bait & switch...!!
Originally Posted by Dario
I can Make it to fit Someone else's eye. Another words I make these and Some of you guys seen other ones I make. I have people driving 2 or 3 hours to my shop in CT to make stainless mufflers or whole Exhaust systems. I use Stainless Piping Stainless Welds and High quality Lifetime warranty Mufflers from Wicked Flow or other companies if preferred. I Specialize with Mercedes cars and I restore them. These Mufflers Last forever and because Mercedes run so long they need a muffler that does not rust. Everyone wants a maintenance free car and Mercedes are those cars but with a Stainless Exhaust that's one thing out of the way FOREVER!!! Let me know what tips you want how you want Them angled. You gain Performance that definitely will make your Benz Stand out from the rest oft the cars. If you want to go all out and just do pipes no muffler I can do that too. If you do come to my shop I and I can perform the work on your car directly you can save 130$ on shipment and I can Inspect your W124 or any other chassis FREE!!!.
I can make the muffler for a 300D 300E 400E E320 E420, 300ce E320 Coupe or convertible, 500E and E500. Muffler pictured has a Magnaflow polished muffler which was an extra $100 an Ebayer requested. Also the pictured muffler is a 500E muffler and Because of the 2.75" pipes and a Special flange That build is $400 more on top of the $600. 2.75" original size pipe for 500e is twice more expensive and there is alot less room between axles so there is more wasted material and more work. Total For a 500E muffler with Magnaflow is $1000, Wicked Flow is $900.
Each muffler is about 10 hours of work and Ebay plus shipping takes $270, pipes are $170, Tips are $100 Weld wire plus Hanger is about 40 Flange is $15 total parts $310 + 250 ebay and shipping I Get $305 for 10 Hours of work Dont be surprised If I say Im out of stock at $30 bucks an hour at my shop huh most times I have better things to do then frying my skin. But for all non 500E its easier and 600$ with a wickedflow will do. Pipes are cheaper 2.50" and no flange so $600 is enough. With this slanted look there is no modifications to bumper necessary. If youre local I can install free of charge and give a better deal.
Ken got the Fox cat-back exhaust for under $900 delivered to USA, I'd seriously consider that if you are willing to spend $600 already.