WTB: Front Plastic Seat Rail Floor Cover (Gray)

[Ntrepid]

I am looking for the cover which goes on the end of the seat rails and surrounds the bolt which attaches the seat to the floor pan. I have a gray interior. This should be a part which is identical across all W124 models. In fact, I think the driver and passenger as well as left and right rails are identical.

I need one.


Robert

[Jlaa]

I am looking for the cover which goes on the end of the seat rails and surrounds the bolt which attaches the seat to the floor pan. I have a gray interior. This should be a part which is identical across all W124 models. In fact, I think the driver and passenger as well as left and right rails are identical.

I need one.


Robert

124 919 35 20

in black. Are they not all black?

https://www.500eboard.com/forums/showthread.php?t=11580

[Ntrepid]

Negative, Ghost Rider. The gray interior had color matching covers.


Robert

[gsxr]

I think Robert is looking for the front rail covers, which are color-matched to the interior. These are different for left vs right rails (mirror image), but the same for driver vs passenger seat. A1246840318 left, A1246840418 right, color suffix 7101 for gray. NLA in gray of course, only black is available, and only left side. Photos at this link.

The rear seat rail covers are all black, as are the seat belt rail covers.

[ace10]

A12468421187101

But they appear specific to location. And color.


Nice picture of top and bottom sides
https://www.ebay.com/itm/Genuine-Mer...1/283179608653

[gsxr]

A12468421187101

But they appear specific to location. And color.

That part number is for the 1986-1990 seat frames... 1991-up use different part numbers. VIN break is A533112 / A533113.

EDIT: That is actually the cover for non-electric seats. Depending which chassis you look up in the EPC, the description does not make this clear!!

[Ntrepid]

Dave is spot on.


Robert

[ace10]

That part number is for the 1986-1990 seat frames... 1991-up use different part numbers. VIN break is A533112 / A533113.

EDIT: That is actually the cover for non-electric seats. Depending which chassis you look up in the EPC, the description does not make this clear!!

Screw you guys. See if I try to help again.
LOLLLLL

The 124 platform seriously scares me due to stuff like this. I think I'm gonna stick with Land Cruisers.

[Jlaa]

Negative, Ghost Rider. The gray interior had color matching covers.


Robert

Got it then - you are looking for the fronts. Maverick, it's not your parts hunting, it's your attitude. The permutations are dangerous, but right now you're worse. Dangerous and foolish.

[Jlaa]

Screw you guys. See if I try to help again.
LOLLLLL

The 124 platform seriously scares me due to stuff like this. I think I'm gonna stick with Land Cruisers.

No wonder this stuff cost 80K MSRP in 1992. There's no regard for minimizing SKU count / reusability of parts. Its like they were TRYING to make the car as expensive as possible!

[gsxr]

No wonder this stuff cost 80K MSRP in 1992. There's no regard for minimizing SKU count / reusability of parts. Its like they were TRYING to make the car as expensive as possible!

Nah, the 124 was just the trial run for that.

Now, the 140 chassis, they really did try to make the car as expensive as possible!! (Possibly the R129 as well.)

[david hendy]

I have several sets of these grey seat trim covers for free

[maw1124]

I have several sets of these grey seat trim covers for free

And the 500EBoard strikes again... Hendy to the rescue.

maw